Dissertações

URI permanente para esta coleçãohttps://rigalileo.itegam.org.br/handle/123456789/174

Dissertações produzidas oriundas de convênios

Navegar

Agora exibindo 1 - 20 de 536

A Importância da Convergência Tecnológica nas Áreas de Telecomunicações como Ferramenta Estratégica ao Desenvolvimento Regional: Uma Visão dos Stakeholders
(Universidade Federal de Santa Catarina (UFSC), 2001) LEITE, Jandecy Cabral; ROSSETTO, Carlos Ricardo
The study addresses the importance of technological convergence in the telecommunications area as a strategic tool for the sustainable development of the Amazon State, from the stakeholders' perspective. The research demonstrates that, despite the geographical and communication challenges of the region, technological convergence can contribute to the conservation of natural resources and the well-being of the population. The work explores the relationship between globalization, sustainable development, and technological advancement, highlighting the need for policies and strategies that integrate these areas for regional development.
Protocolo Híbrido para Autenticação Quântica de Mensagens Clássicas com uso do Gerador de Sequências Pseudo-aleatórias Blum-Blum-Shub
(Universidade Federal do Pará, 2006) AZEVEDO, Manoel Socorro Santos; ASSIS, Francisco Marcos de; FREIRE, Raimundo Carlos S.
In the present time, when the search for computational and unconditional security is a reality, studies have been done to solve problems related to messages changes and authentication, in a safe way. Cryptographic systems are studied, valued and tested for real safety, allowing the cryptoanalysis of such systems. The quantum cryptography appears as a powerful allied to provide unconditional security. The quantum authentication of classic messages is a reality that can be put in practice in a relatively short time. A hybrid protocol authentication of classic messages is considered, using the BBS (Blum-Blum-Shub), pseudo-random sequence generator. The protocol´s security against individual attacks is formally evaluated.
Aplicação de Filtro Harmônico em Sistemas Elétricos de Baixa Tensão Utilizando Lógica Fuzzy
(Universidade Federal do Pará, 2010) CIRINO, Weverson dos Santos; COSTA JUNIOR, Carlos Tavares da
This work presents a solution to minimize harmonic distortion in low-voltage electrical systems through the application of passive harmonic filters and the use of fuzzy logic. The proposed algorithm detects and calculates the frequencies at which the Total Harmonic Distortion (THD) value is elevated, comparing it with a normative index. Once the need for filter application is identified, the algorithm designs the passive filter, chosen for its ease of installation and low cost. The algorithm also recalculates the THD after filter application, using fuzzy logic to classify the final result.
Utilização de Dutos Descartados do Gasoduto Coari-Manaus para Confecção de Ponte Provisória sobre o Igarapé do Cedro Segundo a Norma API 5L X70
(Universidade Federal do Pará, 2010) SANTOS, Doriel Andrade dos; FARIA, Marlene de Araújo
This paper aims to present an alternative construction of an engineering project, with the use of API 5L X70 pipeline discarded from the Coari-Manaus pipeline, in the process of building a temporary bridge over the Cedro creek in the Amazon rainforest. The goal is to enable the transport of workers and materials for the industrial production of the Compression Station - ECOMP in Juaruna. The ANSYS 8.0 program was used to analyze the stresses and deformations of structural elements subjected to loads. The study also presents a proposal for the mitigation of environmental impacts and addresses the logistical challenges faced in the Amazon region.
Análise Ergonômica Aplicada aos Processos Industriais Relacionada a Trabalho em Ambientes a Altas Temperaturas
(Universidade Federal do Pará, 2010) PINHEIRO, Jaqueline Silva de Souza; Prof. Dr. Roberto Célio Limão de Oliveira
O estudo investiga a ergonomia em ambientes industriais de altas temperaturas, destacando riscos ocupacionais e possíveis melhorias. A pesquisa de campo na WM GAS da Amazônia Ltda. revelou a falta de adequação ergonômica e propõe soluções para aprimorar a segurança e saúde dos trabalhadores.
Metodologia de Avaliação da Qualidade do Ruído nos Postos de Trabalhos Industriais Baseada em Lógica Fuzzy
(Programa de Pós-Graduação em Engenharia Elétrica, 2010) NOGUEIRA, Maria Amélia Costa Saraiva; COSTA JUNIOR, Carlos Tavares da
The noise is ranked third among the most unhealthy agents affecting human health. Occupational noise that affects employees in their day-to-day tasks can be prevented through the involvement of employers and employees in a hearing conservation program. This study proposes the applicability of fuzzy logic to evaluate the quality of noise in industrial jobs, considering variables such as noise level and number of hours worked. Thus, using fuzzy logic modeling, measured noise levels were assessed, generating results that classify the work environment as satisfactory or high-risk, as well as providing guidance on whether or not to use safety equipment in hazardous environments. Prevention seeks to minimize or even eliminate hearing and non-hearing health problems, which are very common nowadays.
Sistema para Tomada de Decisão na Programação de Produção de Celular e Modem, Utilizando Lógica Fuzzy
(Universidade Federal do Pará, 2010) SILVA, Carlos Américo de Souza; COSTA JUNIOR, Carlos Tavares da
The objective of this paper is to present a model using fuzzy logic, which seeks to assist the process of making decision as to which product should have priority in scheduling of the manufacturing process where there are two classes of products (WCDMA Modem and Mobile Phone). With this, it aims to identify particularities and characteristics of the productive processes, creating a better sequencing of production, whose master plan of production will be able to meet demand according to market fluctuations. The main purpose of the proposed system is to assist professionals in industrial planning to determine which products should be prioritized in the production line based on manufacturing characteristics, such as delivery time, cycle time, production process, and margin contribution, creating a production program best suited to the reality of the organization, in other words, optimizing existing resources and increasing profits.
Metodologia para Diagnosticar a Qualidade de Energia Elétrica Referente à Distorção Harmônica em Sistema Trifásico de Baixa Tensão Utilizando Lógica Fuzzy
(Universidade Federal do Pará, 2010) GONÇALVES, Benevaldo Pereira; COSTA JÚNIOR, Carlos Tavares da
This work emphasizes the importance of monitoring and diagnosing the quality of electric power from the viewpoint of harmonic distortion present in low-voltage three-phase electrical installations. The proposed methodology analyzes and diagnoses the level of harmonic disturbances by evaluating the total harmonic distortion (THD) indicator, supported by an expert system based on a Fuzzy inference system. The study presents a systematic approach to assessing power quality, using regulatory standards and recommendations, and demonstrates the effectiveness of Fuzzy logic in formulating precise and standardized diagnostics.
Ensaio Mecânico e Aplicação da Lógica Fuzzy para Avaliação do Canote do Garfo
(Universidade Federal do Pará, 2010) SANTOS, Ruy Sidney Nascimento dos; FARIA, Marlene Araújo de
Technological innovation has been one of the fundamental factors that drive major companies to stay atop the world ranking of the global market. Simulation methods for evaluating the mechanical behavior of products subjected to static and dynamic loads are extremely necessary to reduce manufacturing costs. This study aimed to use fuzzy logic in a product called the bicycle fork seatpost, where the degree of membership and accuracy, varying between 0 and 1, were analyzed, focusing on the product's behavior and its validation.
Metodologia para Diagnosticar a Qualidade de Energia Elétrica Referente à Distorção Harmônica em Sistema Trifásico de Baixa Tensão Utilizando Lógica Fuzzy
(Universidade Federal do Pará, 2010) GONÇALVES, Benevaldo Pereira; COSTA JÚNIOR, Carlos Tavares da
This work emphasizes the importance of monitoring and diagnosing the quality of electric power from the viewpoint of harmonic distortion present in the electrical installation in low voltage three-phase system using a methodology to analyze and diagnose the level of harmonic disturbances evaluating the overall indicator of distortion Harmonic (THD), supported by an expert system based on a Fuzzy inference system.
UTILIZAÇÃO DE DUTOS DESCARTADOS DO GASODUTO COARI-MANAUS PARA CONFECÇÃO DE PONTE PROVISÓRIA SOBRE O IGARAPÉ DO CEDRO SEGUNDO A NORMA API 5L X70
(Universidade Federal do Pará, 2010) SANTOS, Doriel Andrade dos; FARIA, Marlene de Araújo
This study aims to present an alternative construction method using discarded API 5L X70 pipelines from the Coari-Manaus gas pipeline for the construction of a temporary bridge over the Cedro stream in the Amazon rainforest. The bridge facilitates material and worker transportation for the construction of the Compression Station – ECOMP in Juaruna. The ANSYS 8.0 program was used to analyze the structural behavior of a bridge element, applying numerical methods to evaluate stress and deformation in structural components. Additionally, an environmental mitigation proposal is presented to reduce the impact of equipment crossing the Cedro stream, as well as the logistical challenges faced by companies operating in the Amazon region.
Sistema para Tomada de Decisão na Programação de Produção de Celular e Modem Utilizando Lógica Fuzzy
(Universidade Federal do Pará, 2010) SILVA, Carlos Américo de Souza; COSTA JUNIOR, Carlos Tavares da
The objective of this paper is to present a model using fuzzy logic, which seeks to assist the process of making decisions as to which product should have priority in scheduling the manufacturing process where there are two classes of products (WCDMA Modem and Mobile Phone). With this, it aims to identify particularities and characteristics of the productive processes, creating a better sequencing of production, whose master plan of production will be able to meet demand according to market fluctuations. The main purpose of the proposed system is to assist professionals in industrial planning to determine which products should be prioritized in the production line based on manufacturing characteristics, such as delivery time, cycle time, production process, and margin contribution, creating a production program best suited to the reality of the organization, in other words, optimizing existing resources and increasing profits.
Utilização do Lodo de Estação de Tratamento de Efluentes da Indústria de Injeção Plástica como Matéria-Prima para Indústria Cerâmica
(Universidade Federal do Pará, 2011) JIMENEZ, Italo Jorge Tavares; SOUZA, José Antônio da Silva
The plastic injection industry has a fundamental importance to the national economy because it is responsible for the production of primary inputs for many industries from electronics. These companies produce effluents coming from units of paint by blasting and spraying. This waste requires special treatment for their separation, storage and disposal. This paper studies an alternative way to use this waste in the red ceramic industry, evaluating parameters that influence important properties of artifacts made of red clay as density, porosity and bending strength, measured for mixtures of 2%, 5% and 10% by weight of waste, for the clay used, the results show that there is influence of this material in solid state reactions and can improve the properties cited.
Simulação Computacional no Auxílio à Tomada de Decisão nos Processos Industriais: Utilizando a Ferramenta Tecnomatix Plant Simulation 9.0
(Universidade Federal do Pará, 2011) SANTOS, Eliton Smith dos; QUARESMA, João Nazareno Nonato
The research presents the use of computer simulation as a tool to aid decision-making in industrial processes, using the Tecnomatix Plant Simulation 9.0 software. The study was applied in a production line of 21" TV sets at the Manaus Industrial Hub, aiming to evaluate the line's performance and propose improvements. The simulation allowed the identification of bottlenecks, the balancing of the production line, and the optimization of resource usage, resulting in a 6.6% increase in daily production. The tool proved effective for preventive and predictive analysis, enabling virtual experiments without interfering with real production.
Diagnóstico de Gerenciamento Municipal dos Resíduos Sólidos da Construção Civil: Abordagem Ambiental no Município de Itacoatiara-AM
(Universidade Federal do Pará, 2011) LIMA, Adelaneide Gomes; NAHUM, Cláudio; DEUS, Ricardo; FORNARO, Adalgiza.; Não especificado no documento.
The expansion of the construction sector in the municipality of Itacoatiara (AM) has led to a significant increase in the generation of solid waste, which is often deposited in irregular places. The study aimed to estimate the generation and map the main sites of irregular disposal of construction and demolition waste (CDW) in Itacoatiara. The research was conducted in two stages: collecting information from public agencies and agents involved in the generation and collection of waste, and photographic mapping of irregular disposal sites. Irregular disposal of waste was found at various points in the city, promoting environmental degradation. The implementation of construction waste management programs is essential to reduce the volume of these materials in the municipality.
Gerenciamento do Suprimento de Óleo Combustível para Usina Térmica no Amazonas Através de Sistemas Inteligentes
(Universidade Federal do Pará, 2011) SILVA NETO, Almiro Gomes da; FARIA, Marlene Araujo de
The objective of this work is to develop a computational tool for decision support in the supply of fuel oil for thermal power plant, examining the main variables of thermal generation using fuel oil and the entire logistical process. The basis for the study is on the operating principle of a thermal plant, the logistics of fuel and its peculiarities. The current supply management and all procedures involved in this process give support for the proposed innovation. The case study consists of a simulation system for managing oil supply through a mathematical simulator to confirm the optimal inventory solution through fuzzy logic. The development of the computational tool for decision support in the new requests of fuel oil includes the characteristics indicated by the users as an interface for easy understanding, operation, and fast processing of information to predict the best time to request a new shipment of oil.
Estudo da Qualidade de Energia Elétrica com Distorções Harmônicas e o Fator de Potência através de um Sistema com Lógica Fuzzy
(Universidade Federal do Pará, 2011) BRITO JÚNIOR, Jorge de Almeida; COSTA JÚNIOR, Carlos Tavares da
This research aims to present a study about a three-phase low voltage harmonic distortion and power factor system, through the application of fuzzy logic, reducing consequences such as losses in installations, voltage drops, under-utilized capacity, and optimizing the use of electricity, bringing benefits to both companies and electricity suppliers.
Aumento da Produtividade: Utilizando a Metodologia Six Sigma e Lógica Fuzzy, um Estudo de Caso em uma Empresa do Pólo Industrial de Manaus – PIM.
(Universidade Federal do Pará, 2011) FERREIRA, Marcela Seixas.; SILVA, Orlando Fonseca.
This study uses the Six Sigma methodology to increase the productivity of the LCD (Liquid Crystal Display) Line in a factory in the Pólo Industrial de Manaus - PIM and a fuzzy inference system to measure the increase in productivity. Several parameters based on the Six Sigma methodology were identified, highlighting: waste, production capacity, and time study. The proposed system is of great importance to practitioners and researchers in production management, aiming for results that reduce costs and increase the organization's profits.
Utilização do Algoritmo no Controle Estatístico de Processo (CEP) e sua Confiabilidade nos Processos Industriais Aplicado em Controle de Torque: Estudo de Caso do Pólo de Duas Rodas
(Universidade Federal do Pará, 2011) ALENCAR, David Barbosa de; OLIVEIRA, Roberto Célio Limão de
The use of Statistical Process Control (SPC) is undoubtedly crucial in the production process, and competitiveness requires continuous improvement in the application of this tool. This paper aims to guide institutions and companies that want to adopt the use of computer technologies tools as SPC, presented through a simplified and affordable, the use of an algorithm. Statistical techniques can be excellent to show the degree of security required by a particular process, and here we show which tools to use in the SPC, to study and validate retrospectively the performance of understanding the production stage, we discuss the use of an algorithm for this application. The case study was applied in a two-wheel hub company, demonstrating the effectiveness of the algorithm in reducing process time and improving torque control reliability.
UTILIZAÇÃO DO ALGORITMO NO CEP E SUA CONFIABILIDADE NOS PROCESSOS INDUSTRIAIS, APLICADO EM CONTROLE DE TORQUE: ESTUDO DE CASO DO PÓLO DE DUAS RODAS
(Universidade Federal do Pará, 2011) ALENCAR, David Barbosa de; LIMÃO, Roberto Célio
The use of Statistical Process Control (SPC) is crucial in the production process, requiring continuous improvement. However, there is resistance to adopting new methodologies. The use of computational tools in SPC has become an essential trend. This dissertation aims to guide companies and institutions in adopting such tools, presenting an algorithm to optimize SPC application. Statistical techniques are employed to validate process security, demonstrating that SPC is a management tool that enables measuring product and service quality, comparing them to desired standards, and implementing corrective actions. The proposed approach is illustrated through a case study in the two-wheel industrial sector.