BIOCOMPÓSITO DE POLIÉSTER REFORÇADOS COM A FIBRA DA FOLHA DE LICURI (Syagros coronata)
Data
2014
Autores
Título da Revista
ISSN da Revista
Título de Volume
Editor
Universidade Federal do Pará
Resumo
O sertão nordestino é dotado de uma flora rica e abundante, tornando-se um grande fornecedor de plantas propícias ao desenvolvimento de novos compósitos poliméricos. Esta dissertação teve como objetivo a avaliação das propriedades mecânicas de compósitos de poliéster reforçados por fibras de Licuri, utilizando um processo manual, com o intuito de proporcionar a confecção do material com o menor nível tecnológico possível, tornando-se assim um material totalmente viável. As fibras de Licuri foram dispersas no compósito aleatoriamente, e a matriz utilizada foi poliéster tereftálico pré-acelerada com naftenato de cobalto e curada a temperatura ambiente com peróxido de metil-etil-cetona (MEK) na proporção de 0,33% (v/v). Os resultados mostraram que a resistência à tração aumentou com o comprimento das fibras (5mm – 13,47 MPa, 10mm – 14,5 MPa e 15mm – 16,97 MPa), demonstrando que os compósitos investigados são potencialmente viáveis.
Abstract
The northeastern hinterland is endowed with rich flora and abundant thus making a major supplier of plants provides the development of new polymeric composites. This dissertation aimed to the evaluation of the mechanical properties of composites reinforced by polyester fibers Licuri using a whole manual process, in order to provide the making of the material with the lowest possible technological level, thus becoming a totally viable material. The fibers were randomly dispersed in the composite, and the matrix used was pre-accelerated terephthalic polyester with cobalt naphthenate and cured at room temperature with methyl ethyl ketone peroxide (MEK) in a ratio of 0.33% (v / v). The results showed that the tensile strength increased with fiber length (5mm - 13.47 MPa, 10mm - 14.5 MPa and 15mm - 16.97 MPa), demonstrating that the investigated composites are potentially viable.
Descrição
Palavras-chave
Fibras de folha, Propriedade Mecânica, Ensaio de tração, Compósito natural, Licuri.